D-Link DCS-8300LH Manual Del Usuario página 10

Section 2: Installation
Step 4
4
Place the baseplate over the holes that are in the wall. Make sure to align the baseplate holes
with the holes in the wall. Use the supplied screws to attach the baseplate to the surface of
the wall.
Step 5
5
Place the camera over the baseplate with the alignment nub pointing left, then attach the
camera by rotating it until the alignment nub points up.
Step 6
6
Adjust the angle and rotation of the camera as desired. You can also rotate the camera on the
baseplate about 45° to the right or left.
D-Link DCS-8300LH User Manual 10