Mounting The Camera - D-Link DCS-8300LH Manual Del Usuario

Section 2: Installation
To mount your camera on a wall or ceiling, please follow the steps below. It is recommended that you configure the camera before mounting.
Step 1
Rotate the baseplate counter-clockwise and remove it.
Step 2
Place the baseplate where you want to position the camera and use a pencil to mark the holes.
You can use the lower holes for a removable installation, or the top holes for a fixed one. Make
sure that the arrow on the baseplate is pointing up.
Step 3
Depending on the material of the wall or ceiling, use proper tools to drill holes 25 mm deep
with a 6 mm drill bit where you marked. If the wall is made out of concrete, drill the holes first,
then insert the plastic anchors to support the screws.
D-Link DCS-8300LH User Manual

Mounting the Camera

1
2
3
9