Consumer Information And Safety; Operating The Cleaner - Hayward SharkVAC XL Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CONSUMER INFORMATION AND SAFETY

Risk of electrical shock or electrocution
The electrical supply to this product must be installed in accordance with all applicable
DANGER
local codes and ordinances. Improper installation will create an electrical hazard which
could result in death or serious injury to pool users or others due to electrical shock, and
may also cause damage to property.
Do not play with cleaner or cable or apply to body. Can trap or tear hair or body parts.
WARNING
Cable can trip or entangle swimmers, which could result in drowning.
Before installing the cleaner, understand cleaner coverage. The cleaner was not designed
CAUTION
to automatically clean steps or to work under a solar cover. It was also not designed to do
initial cleanup for a new pool installation.
A Ground Fault Current Interrupter (GFCI –USA) must be installed to protect your
electrical outlet and to prevent any possible electric shock. Failure to do so could create
WARNING
an electrical hazard which could result in death or serious injury to pool users or others
due to electrical shock and may also cause damage to property.
DO NOT switch the pool cleaner to "ON" if it is not immersed in the water. Operating the
cleaner out of the water may cause severe damage and will result in loss of warranty.
CAUTION
Always remember to turn off the power supply "OFF" and unplug it from the power
outlet before removing the cleaner from the pool.
It is mandatory to allow a safety distance between the power supply and the pool as
WARNING
required by the current installation standard (

OPERATING THE CLEANER

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
11.5 feet minimum or 3.5 meters
).
5

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

E.vac pro

Tabla de contenido