General Power Tool Safety Warnings; Work Area; Electrical Safety - FEIDER Machines FRX600 Manual Del Usuario

2 x saw blade with hardened metal teeth
(A): suitable for: softwood, hardwood,
boards of all type ---24T and 32T
1x diamond saw blade ( C ): suitable for:
ceramic, tile
1x G type clamp
When parts are missing or damaged, please contact your dealer.
5 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal
injury or damage to the tool.
Read the manual carefully
before use.
In accordance with essential
requirements of the
European directive(s).

6 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings and instructions
may result in electric shock, fire and/or serious injury. Save all warnings and instructions for
future reference. The term "power tool" in the warnings refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
6.1

Work area


Keep work area clean and well lit. Cluttered and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.

Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
6.2

Electrical safety

Always check that the power supply corresponds to the voltage on the
rating plate.

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
Do not stare into the laser beam
1x HSS saw blade ( D ): suitable for: soft
metal, aluminium --- 80 T
1x dust extraction hose (B)
1x inner hexagon wrench (F)
1x guide fence (G)
1x mitre base
Class II - The machine is double
insulated; Earthing wire is
therefore not necessary.
Wear gloves.
Wear hearing and eye
protection
EN
.