DISPLAY
FAN SPEED
• Everytime you push this
button, it advances the setting as follows:
(High(F3) , Low(F1) -> Med(F2) ._ High(F3)}
J
• The fan stopswhenthe compressorstops cooling.
Approximatelyevery 3 minutesthe fan will turn on and
check the room air to determine if cooling is needed.
_REMOTECONTROL
SIGNALRECEIVER
_POWER
• To turn the air conditionerON, push
the button.To turn the air conditioner
OFF, pushthe buttonagain.
• This button takespriority over any
other buttons.
• When youfirst turn it on, the
air conditioneris on the High cool
modeand the Temp. at 72°F.
TEMPERATURE
SE'I-rlNG
• This button can automaticallycontrol
thetemperatureof the room.
The temperaturecan be set within a
rangeof 60°Fto 86°F by I°F.
Selectthe lower numberfor lower
temperatureof the room.
DISPLAY CO01JFAN
• Everytime you push this button,it will
togglebetween COOLand FAN,
- TIMER
- SHUT-OFFTIME
• If unit is running,Timer sets numberof hours until shut-off.
• Everytime you pushTimer button,il advancesthe Timer settingas follows: 1 Hour i. 2 Hours I, etc.
12 Hours maximum.
- STARTTIME
• If unit isoff,Timer sets numberof hours beforeunit starts.
• Everytime you pushTimer button,it advancesthe Timer settingas follows: 1 Hour _ 2 Hours i. etc. t,
12 Hours maximum.
AIR DIRECTION
ADJUSTMENT
HORIZONTAL AIR DIRECTION CONTROL
The horizontal air direction is adjusted by moving
the vertical louvers right and left with your
fingertips. (FIG. 26)
VERTICAL AIR DIRECTION CONTROL
The vertical air direction is adjusted by moving the
horizontal louvers up and down with your fingertips,
(FIG. 27)
FIG. 26
FIG. 27
-11 -