Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2. CONFIGURE AND OPERATE THE REMOTE CONTROL IN 4 EASY STEPS
2.1 (Step 1) Correct setting of time and day
_________________________________________________________________________________________________________________________________________________
1. Press the button
/
to set the correct day where DAY 1 is Monday and DAY
7 is Sunday.
2. Press the button
/
to set the correct hour from 00 to 23.
_________________________________________________________________________________________________________________________________________________
2.2 (Step 2) Setting the automatic weekly program
After setting the time and day, the Remote Control will follow the preset automatic program. The heating program includes 6 daily time bands for the temperature level, numbered from 1 to
6. The time bands can be set between 00:00 and 24:00, adjusting them in 10-minute increments. Each temperature level can be set between 7°C and 32.5°C, adjusting it in 0.1°C incre-
ments. It is therefore possible to program any combination of time and temperature during the day, and each day of the week can be different. The preset automatic program is as follows:
From Monday to Friday
Start time
Temperature level
From Saturday to Sunday
Start time
Temperature level
Follow the instructions below to change the preset automatic program.
1. Press the button
button
. The 6 daily time bands blink and the number 1 of DAY 1 is followed by an arrow (
changed.
2. Press the button
. The hour and minutes start blinking: press the buttons
ments. By keeping the button pressed the hour and minutes will change rapidly.
3. Press the button
. The indication of room temperature inside the house starts blinking: press the buttons
ture level in 0.1°C increments. By keeping the button pressed the temperature will change rapidly.
4. Press the button
. The 6 daily time bands blink.
5. Then press the button
6. The remaining time bands can be displayed by selecting bands 3, 4, 5 or 6 with the buttons
. The day starts blinking: press the buttons
. The hour starts blinking: press the buttons
Band 1
Band 2
06:30
08:00
21°C
18°C
Band 1
Band 2
08:00
10:00
21°C
21°C
. If DHW programming has been enabled, select the radiator symbol with the buttons
to display time band 2 of Monday, modifiable by repeating points 2 to 4.
code 3541Z230 - Rev. 03 - 09/2021
3. Press the button
/
4. Press the button
Band 3
Band 4
12:00
14:00
21°C
18°C
Band 3
Band 4
12:00
14:00
21°C
21°C
/
to change the time band start time in 10-minute incre-
. The minutes start blinking: press the buttons
to set the correct minutes from 00 to 59.
.
Band 5
Band 6
18:00
22:30
21°C
16°C
Band 5
Band 6
18:00
23:00
21°C
16°C
/
and confirm with the
) to indicate that the time band 1 of Monday can be
/
to change the tempera-
/
, repeating point 5.
EN
75
Publicidad
Capítulos
Tabla de contenido
