Technical Data - Hilti SCW 70 Manual Del Usuario

4

Technical data

4.1 Technical data
For rated voltage, frequency, current and input power, please refer to the country-specific type
identification plate.
If the device is powered by a generator or transformer, the generator or transformer's power output must be
at least twice the rated input power shown on the rating plate of the device. The operating voltage of the
transformer or generator must always be within +5 % and -15 % of the rated voltage of the device.
Weight in accordance with EPTA procedure 01
Dimensions (L x W x H)
Base plate
Saw blade diameter
Saw blade disc thickness
Kerf width
Saw blade arbor size
Cutting depth at 0°
Cutting depth at 45°
Cutting depth at 56°
No-load speed
Protection class
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound power level (L
WA
Sound pressure level (L
Uncertainty
Vibration information
Triaxial vibration value when cutting wood (a
Uncertainty (K)
16 English
)
)
pA
)
h
SCW 70
5.1 kg
317 x 236 x 269 mm
290 x 170 mm
184 mm ... 190 mm
1.1 mm ... 1.5 mm
1.7 mm ... 2.3 mm
30 mm
(1.2 in)
0 mm ... 67 mm
0 mm ... 49 mm
0 mm ... 38 mm
5,800 /min
II
WSC 7.25­S
5.1 kg
317 x 236 x 269 mm
290 x 170 mm
184 mm ... 190 mm
1.1 mm ... 1.5 mm
1.7 mm ... 2.3 mm
15.9 mm
(5/8 in)
0 mm ... 67 mm
0 mm ... 49 mm
0 mm ... 38 mm
5,800 /min
II
SCW 70
107 dB(A)
96 dB(A)
3 dB(A)
SCW 70
≈ 2.5 m/s²
1.5 m/s²
2021356
*2021356*