Troubleshooting - PROZIS airia Manual Del Usuario

AUDIO PLAYBACK FUNCTIONS
Play/Pause
To pause, press the multi-function button once. To resume playing, press the button once
again.
Next/previous track
To move to the next track, press the right multi-function button twice quickly.
To move to the previous track, press the left multi-function button twice quickly.
Voice assistant
Press and hold the multi-function button for about 1.5 seconds to switch the voice assistant
on. Make sure the soundpods are paired with your smartphone before initiating voice assis-
tant mode.
An audio sound will be played when the voice assistant is switched on.

TROUBLESHOOTING

Some issues that may arise can be solved by the user. If the problem persists after having
tried the following solutions, please contact Prozis customer service.
TECHNICAL PROBLEM
Right and left soundpods
are not paired automatically
when removed from the
charging case.
There is no sound.
CAUSE
Normally, the right and left
soundpods should pair auto-
matically as soon as you take
them out of the charging
case.
Connected device's volume
level is set at a low level.
SOLUTION
Clear Airia soundpod's con-
nected list. Place the right
and left soundpods inside
the charging case. Follow
the instructions provided in
the "Clear the paired device
list stored in the soundpods"
section. Take the Airia out
of the charging case and
put them. You should hear
"pairing mode" on one of the
soundpods. The left sound-
pod indicator light should
flash green slowly and the
right light indicator should
alternate between green and
red. Access your BT device's
listand "Prozis Airia" should
be available for pairing.
Adjust the volume level of
the connected device (smart-
phone, computer, television
etc.).
EN
9