Troubleshooting; Warranty; Ec Declaration Of Conformity; Environmentally-Friendly Disposal - Wolf Garten LYCOS E/500 T Manual De Instrucciones

Troubleshooting

Risk of injuries or material damage
In case of doubt always consult a specialist workshop.
Problem
Line adjustment
does not work.
Motor does not run.
The trimmer starts
to vibrate excessi-
vely.
too frequently.

Warranty

The warranty conditions of our local company or
importer apply in all countries. Under the terms of
the warranty we will repair faults on your device
free of charge, insofar as material or manufactu-
ring defects are the cause. To make a claim under
warranty please contact your seller or your nearest
branch.

EC Declaration of Conformity

instruction manual.
Possible cause
Trimmer line spool is empty.
box.
Cutting line has become caught in the spool.
Cutting line is welded onto the spool.
No mains supply.
Cable damage:
Attention! Electric shock due to cable damage.
A fuse/circuit breaker will not always blow/trip if
the cable is cut through or damaged.
Do not touch the cable before the mains plug
has been pulled out of the socket.
The drive is blocked or the bearing is defective.
The line comes into contact too frequently with
Troubleshooting
WARNING!

Environmentally-friendly disposal

Power tools, accessories and packaging must be
routed to an environmentally sound recycling chain.
-
-
Remedy
Replace the line spool.
up the line again by gently pulling and
insert the spool.
Remove the welded on line section, if ne-
cessary wind up the line again by gently
pulling and insert the spool.
Check the power supply and if necessary
contact an electrician to arrange repair.
Contact a specialist repair shop to arran-
ge inspection and, if necessary, repair of
the grass trimmer.
Depending on the design, use the plant
protection bow.
Do not throw your old power tool away
with the domestic waste. Take it to a
disposal facility.
EN
25