Align The Arm; Manual Manoeuvre; Optionals - O&O NIGHT&DAY.6 Instrucciones Para La Instalación, El Uso Y El Mantenimiento

2.4 ALIGN THE ARM

Adjustable arm holder

2.5 MANUAL MANOEUVRE

Always disconnect the electricity before attempting any work on the system

2.6 OPTIONALS

• Electrically connect the control unit
• Insert about 1 metre of the arm in the holder
• Give the "START" command to position the arm
holder horizontally
"START"
• Pull the arm down to help the reducer counteract
the force of the pre-calibrated spring
• Install the arm and adjust the holder
WITH MOUNTED BOOM ONLY
2. Installation
USE THE ADJUSTABLE ARM HOLDER TO ALIGN
THE ARM WITH THE ROAD.
DO NOT CHANGE THE POSITION OF THE LIMIT
SWITCHES AS THEY ARE ALREADY ADJUSTED.
Releasing the barrier
ADDITIONAL LIMIT SWITCH
11
EN