EN – Quick installation guide
Contents of this guide
This guide tells you briefly how to install the drive module into a 800 mm wide Rittal VX25
enclosure.
Obey the safety instructions
General safety
These instructions are for all personnel who do work on the drive.
WARNING! Obey these instructions. If you ignore them, injury or death, or
damage to the equipment can occur.
•
Keep the drive in its package until you install it. After unpacking, protect the drive from
dust, debris and moisture.
•
Use the required personal protective equipment: safety shoes with metal toe cap,
safety glasses, protective gloves and long sleeves, etc. Some parts have sharp edges.
•
When the drive or connected equipment is energized, do not do work on the drive,
motor cable, motor, control cables or control circuits.
•
Do not do work on the drive when a rotating permanent magnet motor is connected to
it. A rotating permanent magnet motor energizes the drive, including its input and
output power terminals.
•
Do not use the module extraction/installation ramp with plinth heights which exceeds
the maximum allowed height.
•
Attach the module extraction/installation ramp carefully.
EN – Quick installation guide 3
EN
DA
DE
ES
FI
FR
IT
PL
PT
RU
SV
TR
ZH