Schumacher Electric PID-200-USB Manual Del Propietário página 16

PROBLEM REASON
Display shows . 12-
volt voltage is too high.
Display shows .De-
vice demands more than
the inverter's continuous
power rating.
Display shows .
Inverter is too hot.
16 •
•
SOLUTION
If in a vehicle, repair/
replace the alternator or
charging system. Use
a properly sized and
rated 12-volt battery. If
the input voltage returns
to 15-volts or less, the
inverter will automati-
cally restart.
Cycle the inverter power
OFF and ON. If problem
persists, use a larger
inverter or a smaller
device.
Increase the ventilation
to the inverter. Move
the inverter to a cooler
area. Reduce the power
consumption of the
device. The inverter will
automatically reset after
cooling.