Samsung SCC-C7455N Manual Del Usuario página 28

setup
AGC
With this, you can adjust the AGC level of a
camera.
With AGC active, if the signal strength falls
below the standard level, AGC will amplify the
video signal to automatically improve the
sensitivity.
If <SENS-UP> is set to <OFF>, or <FIX>
mode, the <MOTION> menu will switch to
<AGC>.
With the USER (
[ENTER] to display the corresponding screen.
In this mode, you can select from VERY LOW
to VERY HIGH in 16 levels, enabling deeper, wider choices to your convenience.
With the FIX (
screen. In this mode, you can select an individualized mode in 16 levels, regardless of
the brightness.

M
As long as the DAY/NIGHT menu is set to AUTO in Camera Setup, the AGC menu is
not available.

As long as FLICKERLESS is set to ON, the AGC mode is not available.

If you set BACKLIGHT to WDR, the AGC fi x mode is not available.
MOTION
You can specify a level of AGC for controlling the camera motion.
This is available only of the SENSE UP menu is set to AUTO.
Select F.FAST if you want to monitor a very fast moving object in a low contrast
scene, and S.SLOW if monitoring a very slow moving, inanimate object in the same
condition.

As long as DAY/NIGHT is set to <AUTO>, the <MOTION> menu is not available.
DNR
Reduces the noise on the camera image.
The higher the level is, the greater the effect is.
Set it to <USER> to specify the level.
28_ setup
) submenu selected, press
) submenu selected, press [ENTER] to display the corresponding
CAMERA SET CAMERA SET
CAMERA ID CAMERA ID
VPS VPS
IRIS IRIS
AGC (VERY HIGH) ---
DNR DNR
SHUTTER SHUTTER
SENS-UP SENS-UP
FLICKERLESS FLICKERLESS
XDR XDR
OFF OFF
OFF OFF
ALC ALC
MID MID
OFF OFF
OFF OFF
OFF OFF
MID MID