Metalux Skyridge Single SRS Instrucciones De Instalación página 2

Installation Instructions – Skyridge Single (SRS) Luminaire Sensor Installation
To mount the sensor through a ceiling tile or drywall, thread
the spring arms onto the sensor, adjusting its location for
the thickness of the ceiling material. Depress the spring
arms and insert the sensor through a 15/16th inch diameter
hole in the ceiling tile or drywall. The spring arms will hold
the sensor in place.
Refer to guide ADF142495V01 for additional information
regarding integrated sensor systems operations. For
additional information on a system, refer to
www.eaton.com/lighting
Coverage of Lumawatt Pro LWT (Tile Mount) Option
16ft/4.8m
18ft/5.5m 9ft/2.8m
N otee: Recommended sensor placement is one-to-one per fixture. Coverage patterns indicate where
occupancy detection occurs. Exceeding the higher or spacing shown will result in reduced coverage.
2
EATON IB519024EN
Side View
0 9ft/2.8m 18ft/5.5m
Installation Instructions
18ft/5.5m
9ft/2.8m
0
9ft/2.8m
18ft/5.5m
Top View