Grundig SI 4550 Manual Del Usuario página 24

OPERATION_______________________________
Setting_the_temperature
1__
A fter plugging in the iron, set required ironing
temperature by turning the temperature setting
dial to the appropriate position (see the
C
temperature and steam settings table below).
2__ T he temperature of your appliance can
be increased by turning the temperature
setting dial clockwise. For steam ironing
C
temperature setting dial
range between ••• and MAX.
When setting the temperature of your appliance,
we recommend to consider the following table.
Fabric_ Temperature_
Type Setting
Synthetic •
•
Silk
••
Wool
Cotton •••
Linen -
MAX
Jeans
3__ I n order to learn the ironing temperature to be
used, check the garment's care label.
4__ I f you don't know the fabric of your garment,
first iron a part that is not visible and determine
a correct ironing temperature for it.
5__
I n order to prevent shiny stains that may form
on synthetic fabrics or silk, iron on the reverse
side of the fabric. Do not use the spray function
in order to prevent the stain formation.
Steam_ironing
1__
S et the desired steam level by pushing the
steam setting knob
2__
S et the required ironing temperature (see
chapter "Setting the temperature"). Make sure
that the temperature setting dial
the range between ••• and MAX. When
the thermostat warning light
soleplate temperature has reached the level to
generate steam.
24 ENGLISH
should be in the
C
Steam_Setting
Without steam
Without steam
Without steam
With steam
With steam
.
H
is within
C
turns off, the
B
Vertical_steam_ironing
Note
Vertical steam ironing can be applied to
7
hanging clothing items (suits, jackets and
coats).
Caution_
Never direct the steam at people or pets.
7
1__ S et the desired steam level by pushing the
steam setting knob
2__ H old the iron in a vertical position and press
the steam burst button
curtains and your garments on the hanger.
Steam_burst
1__ D uring ironing, in order to remove tenacious
creases, you can gain strong steam by pressing
on the steam burst button
5-second intervals.
2__
W hen you start to iron, steam burst may not
emit in your first couple of presses. In order to
gain steam burst, the temperature setting dial
should be at ••• or a higher level.
C
3__
Y ou can iron the creased parts of the garments
with the steam power which is obtained by
pressing the steam burst button
ironing. However if this process is maintained
without an interruption, water may also come
from the iron soleplate
Water_spray
1__ M ake sure there is sufficient water in the water
tank. Spray function can be used in order to
remove tenacious creases by pressing the
spray button during dry or steam ironing.
I
.
H
to steam iron your
J
for 3-4 times with
J
during steam
J
along with the steam.
E