Safety Information; Product Specifications - allen+roth 73-BRT2-BN-AR Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install
the product.
CAUTION
• If you solder the joints during installation of the faucet, the seats, cartridges, and washers must be
removed before using a flame or the warranty will be voided on these parts.
• Cover the bathtub drain to avoid losing parts.
WARNING
• Protect your eyes with safety glasses when cutting or soldering water supply lines.
• NOTE: When making water line connections, HAND TIGHTEN. DO NOT OVERTIGHTEN. Do not
use PTFE pipe tape, plumber's putty, pipe dope or any other type of sealing compound on water
inlet or threads. Additional compound is unnecessary. A watertight seal between the thread inlet
and supply tube is achieved by compression.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product. Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Adjustable Wrench, Allen Wrenches, Slip Joint Pliers,
Pipe Wrench, Phillips Screwdriver, Silicone, Basin Wrench, and Supply Lines.
Installation may vary depending on how the previous faucet was installed. Supplies necessary for the
installation of the faucet are not all included; however, they are available wherever plumbing supplies
are sold.
Prior to beginning installation, turn off the hot and cold water lines, then turn on the old faucet to
release built-up pressure. When installing the new faucet, hand tighten the connector nuts. DO NOT
OVERTIGHTEN. Connections that are too tight will reduce the integrity of the system.

PRODUCT SPECIFICATIONS

Minimum flow rate: 2.4 GPM (9.08 LPM) at 20 PSI
ASME A112.18.1/CSA B125
Brushed nickel finish - 1158245
Chrome finish - 1240695
Oil-rubbed bronze finish - 1240697
Total weight of item: 5.73 lbs.
Ceramic cartridges
3
B

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

73-brt2-ar73-brt2-orb-ar115824512406951240697

Tabla de contenido