Techincal Specifications - Smoothskin Bare Fit Guia Del Usuario

16. TECHNICAL SPECIFICATIONS
The SmoothSkin Bare Fit is a filtered broadband Intense Pulsed Light system with the following technical specifications:
•
Repetition Rate:
•
Max Optical Output:
•
Pulse Length:
•
Wavelength:
•
Power Line Input:
•
Operating temperature:
•
Operating humidity:
•
Operating Pressures:
•
Treatment area (spot size):
The area directly around the treatment window is classified as the Applied Part, and can reach a maximum temperature of 52°C.
Ensure SmoothSkin Bare Fit is used as directed in Section 8.
TRANSPORT CONDITIONS:
•
Temperature:
•
Humidity:
•
Pressures:
If the device has been stored at temperatures outside of the stated operating range, then please allow at least 30 minutes
before use to allow the device to acclimatise.
30
Manually pulsed every 0.6 seconds. Continuous operation
4J/cm2
0.8 – 1.0msec FWHM
510-1100nm
100–240V~, 50/60Hz,1.7-0.91A
Between 5°C and 40°C
Up to 93%R.H. non condensing
700hPa to 1060hPa
3 cm2 (30mm x 10mm)
-25°C to +70°C
Up to 93%R.H. non condensing
500hPa to 1060hPa