Restore (Reset) - ABB 2CLA234009N234001 Instrucciones De Instalación, Uso Y Mantenimiento

CONFIGURATION MENU

12.15 Restore (reset)

IMPORTANT: the reset operation is advised for the installer or expert users
as, with this operation, many previously made adjustments and program
settings will be lost, depending on the type of system.
•
The operation can be carried out by following the path Menu -> CONFIG SEt
->: with the 23 buttons, select the element REESET SEt and confirm with
the OK button.
•
The display will propose choosing between doing the reset «YES» or not
«NO».
•
To choose, use the 23 buttons, and then click the OK button to confirm.
•
By confirming NO, the display will exit the function and return to the initial
RESET SEt screen. Press the back button to exit.
•
By confirming YES, the word «RESET» will be displayed for 3 seconds, and
then the system will reboot and position itself on the language screen.
•
Use the 23 buttons, to select the required language. Press the OK button
to confirm.
•
For the chronothermostat to be operational showing the normal operating
display, it will be necessary first to adjust or confirm: the current date, hours
and minutes, and the daylight saving time summer/winter hours (see full
procedure in section "12.4 Data
NOTE: the chronothermostat restores may factory settings (by default),
excluding certain particular elements that use the last adjusted value (see
summary table in chapter
Chapter 12
input/modification").
"3 FACTORY SETTINGS")
ABB ABB
Set
0 2 4 6 8 10 12 14 16 18 20 22
OK
OK
OK
Set
0 2 4 6 8 10 12 14
OK
16 18 20 22
OK
81 81 81 81