Other Risks; Health Hazard By Dust; Symbols; Intended Use - Festool LRS 400 Manual De Instrucciones

sharp and clean to enable better and safer
work. Follow the maintenance regulations and
the information about tool replacement. Keep
handles dry and free of oil and grease.
– Do not leave any tool key inserted. Before
switching on check that key and adjustment
tools are removed.
– Avoid unintended start-up. Do not carry a
compressed air tool that is connected to a com-
pressed air supply with your fi nger on the trig-
ger. When connecting the compressed air hose
to a compressed air supply, make sure that the
switch is not activated.
– Be alert! Pay attention to what you are doing.
Always work with care.
- Do not use the compressed air tool if you are not
able to concentrate properly.
– Have your compressed air tool repaired by a
qualifi ed specialist. This compressed air tool
corresponds to the relevant safety regulations.
Repairs should only be carried out by a qualifi ed
specialist. The operator is otherwise at risk of
an accident.
– Only work with correctly processed com-
pressed air. Using the Festool supply unit VE
guarantees this.

Other risks

In spite of compliance with all relevant design
regulations, dangers may still present themselves
when the machine is operated, e.g.:
– Workpiece parts being thrown off,
– Parts of damaged tools being thrown off,
– Noise emissions,
– Dust emissions.

Health hazard by dust

Various dust created by power
sanding, sawing, grinding, drilling and other con-
struction activities contains chemicals known (to
the State of California) to cause cancer, birth de-
fects or other reproductive harm. Some examples
of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
The risk from these exposures varies, depending
on how often you do this type of work.
To reduce your exposure to these chemicals:
Work in a well ventilated area, and
work with approved safety equip-
ment, such as dust masks that are
specially designed to filter out
microscopic particles.
TO REDUCE THE RISK OF INJURY,
USER MUST READ INSTRUCTION MANUAL.
Warning of general danger
Read the Operating Instructions/Notes!
Wear ear protection.
Wear protective goggles.
Wear a dust mask.
n no load speed (revolutions)
0
1/min
revolutions per minute
rpm
min minutes
l liter
bar bars
lb. pound
mm millimetre
'' inch
kg kilograms
l/min liter per minute
psi pounds per square inch

Intended use

The tools are designed for sanding wood, plastic,
composite materials, paint/varnish, fi lling mate-
rial, metal and similar materials. Materials con-
taining asbestos must not be processed.
Only use with Festool hose system IAS 2 or IAS 3!
The user is liable for damage and injury
resulting from incorrect usage!
7

Symbols