Fan Speed; Local Ventilation; Advanced Use Of The Blueface Controller; Time Schedule - Airzone ZBS Manual Del Usuario

Power. The fan speed is higher than in standard mode to increase the flow.

Fan Speed

This parameter is only available in zones with individual units. It is used to set the fan speed of the AC unit fan. The fan speed is
set in automatic speed by default.
High speed

Local Ventilation

This option enables the activation
cooling or heating any of the zones.

ADVANCED USE OF THE BLUEFACE CONTROLLER

Time Schedule

Access the time schedules menu by pressing the time schedule icon. Press on the days to access to the available schedules.
Name of the
schedule
Temperature
User mode
To create a new schedule, press "Add new" and follow the next steps:
1. Change the name of the schedule by pressing and holding on it.
2. Select the zone/zones where the schedule applies.
3. Select the desired days of the week.
4. Select the type of time schedule to apply. There are three types of schedules:
User Mode: Allows to choose the user mode and ventilation of the selected zones.
Temperature: Allows to choose the temperature of the zone for cooling and heating mode.
On/Off: Turns on and off the zone.
5. Once the type of schedule is selected, select the time to start the schedule.
6. Finally, press the right arrow icon
to modify any parameter.
Note: The schedules will activate when pressing the confirm button.
To activate/deactivate or modify a schedule, press the desired schedule to access the edit setting and then press the On/Off
selector or parameters to modify. Press and hold on any schedule to see all the available settings:
Edit: Changes the name of a schedule.
Medium speed Low speed
or deactivation of the ventilation in the selected zone when the system is not actively
>
to access to the summary of the schedule and confirm or go back if it is necessary
Automatic speed
Confirm
Select zone
Days of the week
On/Off of the zone
Select time
EN
EN
FR
IT
PT
DE
9