Auto Turn-Off & Reset; Hardware Reset; Factory Reset - Kicker Bullfrog BF100 Manual Del Propietário

Power Saver Mode:
If no audio is detected for 10 minutes, the Bullfrog will automatically enter Power Saver mode
while in Bluetooth and AUX modes.
Auto Turn-Off:
Auto Turn-off is disabled while using the USB Charge Bank, or when charging. The Bullfrog will
enter OFF mode after 1 hour. It must be turned back on for the KICKER Connect App to work.

Hardware Reset:

A hardware reset allows the speaker to recover from unexpected issues. If the speaker
becomes unresponsive, momentarily press the reset button on the side of the speaker using a
paperclip.

Factory Reset:

Factory reset restores the speaker back to the way it was shipped to you. This can be useful
to reset the equalizer and volume levels to default, and can help resolve issues with Bluetooth,
or with the Kicker Connect app. To perform a factory reset, turn the speaker on and press and
hold the Play button for 10 seconds, or until the LEDs turn off.
9