Temperature,Humidity And Pressure Trends; Reset; Precautions - Oregon Scientific BAR310HG Manual Del Usuario

To toggle temperature unit:
Press °C / °F.
To auto-scan between sensors:
Press and hold CH for 2 seconds.
To end auto-scan:
Press CH.
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM for 2 seconds.
TEMPERATURE, HUMIDITY AND
PRESSURE TRENDS
The trend icons are based on recent readings.
RISE STEADY

RESET

To return to the default settings press RESET.

PRECAUTIONS

This product is engineered to give you years of satisfactory
service if you handle it carefully. Here are a few
precautions:
• Do not subject the unit to excessive force,
shock, dust, temperature or humidity, which may
result in malfunction, shorter electronic life span,
damaged battery and distorted parts.
• Do not immerse the unit in water. If you spill liquid over
it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosivematerials.
• Do not tamper with the unit 's internal components.
Doing so will invalidate the warranty on the unit and
may cause unnecessary damage. The unit contains no
user-serviceable parts.
• Only use fresh batteries as specified in the user's
instructions. Do not mix new and old batteries.
• Due to printing limitations, the displays shown in this
manual may differ from the actual display.
• The contents of this manual may not be reproduced
FALL
without the permission of the manufacturer.
• Do not dispose this product as unsorted municipal
waste.Collection of such waste separately for special
treatment is necessary.
NOTE
contents of the user manual are subject to change without
notice.
8
The technical specifications for this product and the