Hearth & Home DYNAMICS HHSTDF26I Manual Del Usuario E Instrucciones De Funcionamiento página 15

Installation (cont.)
INSTALLING THE BLOWER (OPTIONAL) - continued
4. Route wire harness through channel in the back corner of the stove. There are two observation
ports on the back of the stove to assist in routing the wire harness. Before securing blower
assembly to the stove, put a wire clip on wire harness and snap into the inside of the stove back
panel. Secure blower with 8 screws (see Fig. 9).
Fig. 9—Wire Routing and Blower Attachment
Fig. 10—Connecting Switch
5. Route the wire harness as shown through the opening
in the control panel. Connect the wires to the switch in
the order identified in the wiring diagram (see Fig. 10).
15 Vent-Free Gas Stove User's Manual