CARINg FOR YOUR SPEAkERS
Wipe the cabinet with a clean, dry cloth to remove dust. A damp cloth may dull the cabinet's finish. Do not use volatile
liquids such as benzene, paint thinner or alcohol on the cabinet.
• Do not spray insecticide near the cabinet.
• To remove dust from the grille fabric, use a vacuum cleaner set to low suction.
• Do not wash the grille in water, as water may fade the grille's color or make it uneven.
• Never apply suction or pressurized air to the high-frequency or ultrahigh-frequency horn openings.
• If the surface of the low-frequency driver cone becomes dusty, you can carefully sweep it clean with a soft, dry
calligraphy brush or paint brush. Do not use a damp cloth.
• The grille only fits on the speaker one way, so if you remove the grille, please note the proper orientation of the grille
pins before re-installing the grille on the speaker.
SPECIFICATIONS
JBL
S3900 FLOORSTANDING SPEAKER
®
Speaker type:
Low-frequency transducer:
High-frequency transducer:
Ultrahigh-frequency transducer:
Maximum recommended amplifier power:
Frequency response:
Nominal impedance:
Sensitivity:
Crossover frequencies:
Enclosure type:
Connector type:
Dimensions (H x W x D):
Weight:
3-way floorstanding
Two 250mm (10") pure pulp cones with ferrite motor
assemblies
45mm (1-3/4") compression driver with an Aquaplas-treated
pure titanium diaphragm and neodymium motor assembly
on a SonoGlass
®
Bi-Radial
®
horn
19mm (3/4") compression driver with a pure titanium
diaphragm and neodymium motor assembly on a
SonoGlass
Bi-Radial
horn
®
®
250 watts
32Hz – 40kHz (–6dB)
6 ohms
92dB (2.83V/1m)
850Hz, 12kHz
25mm (1")-thick MDF stock, ported
Dual gold-plated five-way binding posts
1001mm x 370mm x 368mm
(39-13/32" x 14-9/16" x 14-1/2")
39.2kg (86.3 lb)
7
www.jbl.com