Pre-Installation - Duronic EPS Manual De Instrucciones

Pre-Installation

- Carefully unpack the screen.
- Always handle the screen in a level position on a clean surface.
- In order to protect the screen from exposure to stains, keep the screen away
from dirt or dust.
- Mark the location of where the screen will be installed according to the
specific size of the item.
NOTE: To avoid damaging the screen and voiding your warranty, do not pull
the screen out of the case before the screen is installed to a mount at a level
position.
Methods of Installation
Wall Mount
- The screen can be wall-mounted with the
fittings provided. Use the pre-drilled holes
to mark the desire position on your wall,
ensuring that the wall is clean and free of
dust prior to installation.
Ceiling Mount
- Hanging the screen from the ceiling is
another way to install your screen, however
we do not provide the fittings for this use.
Tripod Mount
- The screen can also be used on the tripod
(Optional)
6
Operating Instructions
- Remote Control (Optional)
STOP
DOWN
To extend the screen, simply press "DOWN" until you reach your desired
size, then press "STOP". To retract the screen, simply press "UP" until fully
retracted.
UP
STOP
DOWN
UP
- Wired Inline Control
To extend the screen, simply press
"DOWN" until you reach your desired
screen size, then press "STOP".
To retract the screen, simply press
"UP" until fully retracted.
7