Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Safety
The shower spray must not directly hit the eyes
and other sensitive body parts. Always maintain
a sufficient distance between the shower and
body.
Installation
Only trained plumbing installers may install the
products.
Follow local directives, guidelines, and standards.
Operating data
Ideal operating pressure
Maximum operating pressure
Minimum operating pressure
Equal pressure is recommended
Ideal water temperature
Maximum water temperature
Rinsing the pipes
Before the shower head is installed, the pipes
must be rinsed according to the applicable
standards.
Installing the filter
The included sieve filter must be installed to
prevent dirt particles from entering the shower
head from the pipeline network.
4
General cleaning instructions
The surface of the shower head must be
cold when it is cleaned. Heat accelerates the
destruction of the surface. Follow the detergent
manufacturer's cleaning instructions.
- Maintenance
After using the shower head, rinse it
thoroughly with cold water until it is
completely empty, tilt it, and then use a soft
cloth to rub it dry.
- Cleaning
Dirt or lime spots on the surface should only
3 bar
be removed with mild detergent.
5 bar
1 bar
SprayClean
The elastic anti-calcium bumps ensure that lime
residue is rinsed away by running water. Lime
60°C
70°C
on bumps can be broken and wiped away with
one's thumb or the palm of one's hand.
See page 3.
12
Periodic inspection
Ensure that the shower head is firmly screwed to
the shower arm.
KWC 802585-01 04/18
Publicidad
