Casals CPBLI20K2 Manual Del Usuario página 5

- Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
- Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 130ºCmay cause explosion.
- Follow all charging instructions and do not
charge the battery pack or tool outside the tem-
perature range specified in the instructions.
Charging improperly or at temperatures outside the
specified range may damage the battery and in-
creases the risk of fire.
- Remove the batteries from the appliance if you are
not going to use it for some time.
- Disconnect the battery charger from the mains
when not in use and before undertaking any clean-
ing task.
- Do not open the battery/ies under any circumstanc-
es whatsoever.
- When the battery/ies is not in use, keep it away
from other metal objects like paper clips, coins, keys,
screws ... that could connect a terminal to another.
- The battery/ies should be stored at a temperature
of below 40ºC.
Service
- Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the pow-
er tool is maintained
- Never service damaged battery packs. Service
of battery packs should be only be performed by
the manufacturer or authorized service providers.
-Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer's liability null and void.
Drill safety warnings
- Wear ear protectors when impact drilling. Ex-
posure to noise can cause hearing loss.
- Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
- Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden
wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
Screwdriver safety warnings
- Hold the power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden wir-
ing. Fasteners contacting a "live" wire may
make exposed metal parts of the power tool
"live" and could give the operator an electric
shock.
Additional safety warnings
-CAUTION: In order to prevent overheating do
not cover the appliance.
-Ensure that neither the air access nor exit be-
come either totally or partially covered by dra-
pery, clothing, etc., as this increases the risk of
fire.
- Do not use the battery charger if the cable or
plug is damaged.
- Ensure that the voltage indicated on the charg-
er rating label matches the mains voltage before
plugging in the charger.
- Connect the battery charger to a socket that
can supply a minimum of 10 amperes.
- Only use the appliance with the specific elec-
tric connector provided.
- If any of the appliance casings breaks, imme-
diately disconnect the battery charger from the
mains to prevent the possibility of an electric
shock.
5