Concept ZV1000 Manual De Instrucciones página 46

EN
USE
Before putting the appliance in operation, choose a suitable place for it - a stable, flat surface. To ensure proper air
circulation, it should be placed at least 15 cm away from walls and other objects. Place the unit on a waterproof surface
so water does not damage the furniture or the floor.
Do not place it directly on carpet, towels, blankets or other absorbent surfaces. The manufacturer is not responsible
for damage to property caused by water leakage.
Filling the water tank with water
Ensure that the appliance is disconnected from the mains.
1. Remove the tank from the base of the appliance.
2. Turn the tank upside down and turn the cap counterclockwise.
3. Pour clean cold water into the tank. Only pour water into the tank.
4. Close the tank by turning the cap clockwise. Ensure the cap is tighten properly.
5. Put tank back to the base of the appliance.
NOTE: Make sure the tank is filled with water prior to putting the appliance in operation.
1. 2.
3. 4.
ZV1000
46