Main Control Panel; Manual Mode - Lanaform Luxury Up & Down Manual Del Usuario

CONTROLS
EN

Main control panel

1) Time adjusting button
2) Button to increase intensity of oscillatory movement
3) On/Off button
4) Start button for "Heart rate" feature
5) Mode selection button
6) Button to decrease intensity of oscillatory movement
OPERATING INSTRUCTIONS
1) Connect the unit and switch it on using the switch at the back of the base. The unit is now in standby mode. Press
the On/Off button. The unit will start to operate. If you press the button a second time, the unit will return to the
standby mode.
2) Please read the "Controls" chapter for full details of the various functions available.
3) If you want to use the unit in the "upright" position, stand on the unit before switching it on.
4) If you prefer another position, it is better to ask another person to help you operate the controls, or to start "upright"
and then change position.
5) For both your health and your safety, do not use the unit for more than 20 minutes per séance to avoid stressing your
body.
DISPLAYS
1. Heart rate display
2. Operating time display
3. Manual mode display
4. Mode 1 display
5. Mode 2 display
6. Mode 3 display
7. Intensity level display on a scale of 1 to 16
MODES

Manual mode

In this mode, you can adjust the intensity of the oscillatory movement yourself. There are 16 intensity levels.
M1 Mode 1
The speed increases progressively (step by step) starting at level 1 and finishing at level 8. It then decreases
progressively from level 8 to level 1. You can increase, or decrease the intensity limit setting (10, 12, 14 or
16) using the intensity selection buttons.
M2 Mode 2
The speed increases two levels at a time (2, 4, 6, 8, .....16) and then decreases by two levels at a time
(16, 12, 11 ..... 1).
6