Safco TASK MASTER 5126 Instrucciones De Ensamblaje

ASSEMBLY INSTRUCTIONS
READ THESE INSTRUCTIONS BEFORE STARTING;
FOLLOW THE ASSEMBLY PROCEDURES CAREFULLY
LETTER
DESCRIPTION
CODE
o
o
o
o
o
o
o
o
o
o
o
o
o
o
TOOLS REQUIRED:
ADJUSTABLE
CRESCENT OR
SOCKET WRENCH
o
o
o
o
o
Thank you for purchasing this Safco
product. In order to make any warranty
claim, it is necessary to complete and
return the enclosed warranty
registration within 30 days of purchase.
Due to continual upgrading of our
products, photographs or illustrations
may not reflect actual (exact)
appearance of product.
Safco Products Company
9300 West Research Center Road
New Hope, MN 55428
Fax: (612) 536-6777
5126-37: 1 of 3; Rev. 2; 3/97
Stand-Alone Seating (Mechanical)
QTY. PART NO.
o
o
o
o
o
o
This product functions as a leaning device, serving to reduce
strain on the legs while allowing a full range of upper body
movement. The spring-loaded seat follows the leaning action of
the user, improving circulation in the upper thighs. Seat design
provides lower back support. A large base reduces the chance of
tipping. Rubber feet prevent the stool from accidentally sliding
back. The footrest enables the user to relieve pressure on either
leg from time to time. Height is adjustable from 23" to 34".
Check all parts against Parts List before
beginning assembly.
1
o
2
3
o
4
5
6
o
o
7
o
8
9
o
MAINTENANCE
Clean polyurethane seat and back with soap and water. To repair
small cuts in polyurethane, apply a few drops of quick-drying glue
into the cut and press the sides together until the glue sets.
GENERAL SAFETY INSTRUCTIONS
•This product is designed as a leaning aid, not a chair; do not
attempt to use it with both feet off the floor.
•This product must be on level surface to ensure proper stability.
•Only use this product when fully assembled.
•Do not insert seat's wire prongs into bottom two sets of holes on
back loop; safety tabs (below wire prongs) must fully enter the
holes so seat assembly rests firmly against back loop.
•Never use this product if it does not perform according to this
sheet or warranty may be void.
•Immediately report any problems to Safco and always give the
manufacturer's date code information from the label under the
seat.
NUMBER
o
o
o
o
o o
o
MODEL
5126
o
o
o
o