Technical Specifications - StetSom IR400.1 Manual De Usuario

Technical specifications

Minimum Output Impedance:
Number of Channels:
Output Power @ 14.4V:
Output Power @ 13.8V:
Minimum Input Sensitivity:
Total harmonic distortion (THD+N):
Signal to Noise Ratio:
Frequency Response (-3dB)
Crossover Low Pass:
Crossover High Pass:
Input Impedance:
Supply Voltage:
Musical Consumption:
BASS Consumption:
Dimensions (H x W x L):
Weight:
The measured data are based on equipment from the STETSOM laboratory. Frequency
reference of 1Khz with THD+N to ≤10% in impedances referring to the indicated in each
measurement. The electronic components and the manufacturing process can present
manufacturing variations, thus leading to a variation in the measurements made.
* THD + N and test conditions standardized by the power component manufacturer. Ques-
tions and further information please contact STETSOM.
430W RMS @ 2 Ohms
250W RMS @ 4 Ohms
400W RMS @ 2 Ohms
160W RMS @ 4 Ohms
RCA: 200mV / FIO: 1.5V
10Hz ~ 22KHz
60Hz ~ 22KHz
10Hz ~ 700Hz
RCA: 38K Ohms / WIRE: 10K Ohms
52.5 x 99.8 x 127.5 mm
10
2 OHMS
1
< 0,01 %*
> 90dB
9V ~ 15V
18A (13.8V)
36A (13.8V)
508 g