Protected against ingress of
dust (dust-proof, fully
contactproof) and jet proofed
from any direction�
Any protective cover that is
cracked or split must be
replaced� If the product is
damaged in any way, stop
using it immediately and
contact the service address
indicated below�
Not suitable for indoor lighting
Motion detector field of view
Detection range
Motion detector
Luminous power
Dispose of packaging and
b
product in an environmentally
a
friendly manner!
Risk of environmental damage
from incorrect disposal of
batteries/rechargeable
batteries!
Packaging made of FSC
certified wood mix
MIX
Packaging
With the CE label, the
manufacturer confirms that this
product complies with the
applicable European
z Intended use
The product is intended for automatic
illumination in outdoor areas (e�g� garden,
patio, etc�)� The product must not be installed
indoors, as the battery cannot then be
charged� The product is not suitable for
30
GB/MT
general indoor lighting in the home� This
product is intended for use in private
households only� Any type of use other than
that described above or any modification of
the product is prohibited and likely to cause
damage or even personal injury� The
manufacturer or retailer accepts no liability
for loss or damage that occurs as a result of
use other than intended or incorrect use�
z Specifications supplied
1 LED solar Spotlight with motion sensor
1 wall bracket (model 1020-S)
1 set of fixings (2 wall plugs and 2 screws)
1 instruction manual
z Description of parts
LED module
1
Solar panel
2
Guide holes (1020-B)
3
Motion sensor
4
Switch
5
Spotlight star knob (1020-B)
6
Screw
7
Wall plug
8
Spotlight star knob (1020-S)
9
Wall bracket star knob (1020-S)
10
Wall bracket (1020-S)
11
Screw for Spotlight star knob (1020-S)
12
Guide holes (1020-S)
13
z Technical data
directives�
Model number:
Input voltage
(spotlight):
Solar panel:
Li-ion battery:
1020-B / 1020-S
3,7 V
, 5 W
300mA, max� 1�5W
3,7 V
,
1500 mAh
(non-replaceable)