Assembling Stand - peerless-AV FPZ-655 Instalación Y Ensamblaje

Attach vertical tube (B) to support base (H) using one plastic bushing (AA), one M5 x 55 mm socket screw (R), and
1
M5 nut (S) as shown in detail 1. Tighten M5 x 55 mm socket pin screw (R) using 4 mm allen wrench (X).
B
AA
Press three button bumpers (J) into shelf clamp bracket (C) as shown in fi gure 2.1
2
Press six button bumpers (J) into shelf support (I) as shown in fi gure 2.2.
Loosely fasten two 1/4-20 x 20 mm decorative screws (K) as shown in fi gure 2.3.
C
J
Figure 2.1
I
Figure 2.2
5 of 33
R
DETAIL 1
S
H
J
C
ISSUED: 1-25-11 SHEET #: 125-9149-7 03-17-14
K
I
Figure 2.3