Sleep Operation - Sharp XL-UH240W Manual De Instrucciones

Timer and sleep operation (Remote Control only) (continued)
XL-UH240W
ENGLISH

Sleep operation

The radio, compact disc and USB can be turned off automatically.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or button to select
"SLEEP", and press the
MEMORY button.
4
Press the or
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes 5-minute intervals
5 minutes - 1 minute
5
Press the MEMORY button.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"SLEEP X : XX".
"X : XX" is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button (steps 4 - 5).
E-29
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
button to select the time.
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
1-minute intervals
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback
Sleep timer setting
or button to select
03/12/17
or
"SLEEP OFF", and press the MEMORY button.
To use timer and sleep operation together
(steps 2 - 10, pages 26 - 27).
Timer playback setting
1 minute - 3 hours
Sleep operation will Timer playback start time
automatically stop.
XL-UH240W 26-34.fm
button to select
End time
Desired time