Radio Operation - Sanyo FXCD-1100 Instrucciones De Operación

RADIO OPERATION

4 5 1
SELECTING RADIO MODE
➀
Press the BAND button
Each time the BAND button is pressed, the selected band changes as
shown below.
FMI FMII
RADIO TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S Automatictuning . . . Press the TUNE/SEEK/TRACK  or button
beeps twice if the beep tones are on.
When the button is released, the system will start automatic tuning and stop at the
next receivable station.
S Manualtuning . . . . . . To select higher frequency stations, press the  button for less than 0.5 seconds.
To select lower frequency stations, press the button for less than 0.5 seconds.
To quickly scan up or down in frequency, press and hold the  or button. Release
thebutton when the display approaches the desired frequency, then press and release
the button repeatedly until the desired frequency is displayed.
STORING PRESET STATIONS
➂
The preset buttons can be used to store 6 stations in each band (FMI, FMII, and AM) for convenient access
to your favorite stations.
S Programmingstations . . .
S Quick tuning . . . . . . . . . . .
2
3
. . . . . . . . . . . . . . . . . . . . . . .
to switch from tape, CD player or CD changer* mode to the radio.
AM
. . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Select the desired band, then tune in the station you want to store in memory.
2 Press and hold one of the preset buttons for more than 2 seconds.
Repeat steps 1 and 2 to program additional stations.
Select the desired band, then press one of the six preset buttons.
-9-
1
* If a CD changer is connected.
2
➁
for more than 1 second until it
3