Radio Operation - Sanyo ECD-T1820 Instrucciones De Operación

RADIO OPERATION

1
SELECTING RADIO MODE
Press the BND button
to switch from CD player or AUX mode to the radio.
Each time the BND button is pressed, the selected band changes as shown below.
FMI
RADIO TUNING
• Automatic tuning ............ Press the
• Manual tuning ................ To select higher frequency stations, press the
STORING PRESET STATIONS
The preset buttons  can be used to store 6 stations in each band (FMI, FMII, FMIII and AM) for convenient
access to your favorite stations.
• Programming stations.....
• Quick tuning.................... Select the desired band, then press one of the six preset buttons.
3
........................................ 1
FMIII
FMII
........................................................ 2
button  for more than 0.5 second until it beeps twice if the
or
beep tones are on. When the button is released, the system will start automatic
tuning and stop at the next receivable station.
second.To select lower frequency stations, press the
second. To quickly scan up or down in frequency, press and hold the
button. Release the button when the display approaches the desired frequency,
then press and release the button repeatedly until the desired frequency is
displayed.
1 Select the desired band, then tune in the station you want to store in memory.
Press and hold one of the preset buttons for more than 2 seconds.
2
Repeat steps
1
AM
................................... 3
and to program additional stations.
2 2
-9-
2
4
5
button for less than 0.5
button for less than 0.5
or