Selecting The External Component To Use - JVC KS-FX8R Manual De Instrucciones

Selecting the external component to use

You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
To use the external component as the playback source through this unit, you need to select
which component — CD changer or external component — to use. When shipped from the
factory, CD changer is selected as the external component.
• LINE IN: To use the external component other than CD changer
• CHANGER: To use the CD changer
1. To change the source to FM, AM or TAPE, press FM/AM or TAPE 2 3 .
2. Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears
on the display.
¢ or 4.
3. Select "LINE IN" with
4. Select the desired mode with the control dial.
The external component selecting mode changes as follows:
LINE IN CHANGER
Note:
For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
30