Overview Of Parts - GMZ 50800 Manual De Instrucciones

Assembling the wood saw
Please refer to the illustrations at the back of
the user instructions.
Start by opening the packaging and place
all the pieces supplied as shown so that you
have an overview of them.
It takes 2 people to assemble the wood saw.

Overview of parts

1. Adjustable support bar
2. Bottom shield
3. Length stop
4. Rocker
5. Frame with motor
6. Right outer shield
7. Bag with loose parts
8. Protective plate incl. screws
9. Right inner shield
10. Left inner shield
11. Left outer shield with guide
12. Saw blade
a. Handle with bolts
b. Washers
c. Screws
d. Finger screws
e. Screws
f. Washers
g. Washers
h. Washers
i. Washers
j. Bolt, M8×40
k. Bolt, M8×15
l. Lock nuts
m. Bolts
n. Lock nuts
o. Bolts
p. Spring
q. Inner � ange
r. Outer � ange
s. Washer
t. Nut
u. Special spanner
v. Wrench
Fig. 1-2:
Raise the frame (5) and get the person
helping you to hold it so that it does not tip
over. Allow the rocker to rest on the � oor.
Screw the cross-braces from the rear legs
on the frame and rocker (4) securely to
the frame's front legs using a bolt (m), two
washers (i) and a lock nut (l) on each leg.
Fig. 3:
Secure the chain's outer link to the leg
opposite using a bolt (o), 2 washers (h) and
a lock nut (n).
GB
27