Publicidad
Idiomas disponibles
Idiomas disponibles
OEM Module
MS2 13.56 MHz
MS2S 13.56 MHz & Blue
Installation instructions
Baud rate
Default Baud rate
Mode
Number of bits
Transfer mode
Stop bit
0.16
0.11
General tolerance following ISO NFT 58-000 standard.
1-
The module is limited to OEM installation ONLY.
2-
The OEM integrator is responsible for ensuring the end user has no manual instructions to remove or install module.
3-
The module is limited to installation in mobile or fixed application.
4-
The separate approval is required for all other operating configurations, including portable configuration with respect to Part 2.1093 and different antenna
configurations.
Labeling instructions of finished (host) product. Note that this label must include both this module's ID and the included module's ID.
5-
STid declares that the MS2-A/MS2S-A reader is compliant to the essential requirements of the Directives RED 2014/53/EU and RoHs 2011/65/EU. A copy of our
declaration is available on request from qualite@stid.com.
MS2S reader complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications
could void the user's authority to operate the equipment.
This device complies with the safety requirements for RF exposure in accordance with §1.1307(b), 2.1091 and 2.1093 of the FCC rules Title 47 CFR
Ch. I.
Integrating the MS2S module into a finished product will require:
1) Measure the radiation of the finished product and verify that it complies with the applicable standards (FCC Part-15).
2) Perform tests to ensure that the finished product meets all applicable RF exposure requirements (§1.1307(b), 2.1091 and
2.1093 of the FCC rules Title 47 CFR Ch. I).
In accordance with the provisions of the Environment Code, STid finances the collection, decontamination and recycling of WEEE provided by
ESR-RECYLUM, to which STid adheres and to which it has transferred its regulatory responsibilities as a Producer.
STid recommends that owners of used equipment who wish to dispose of it return it as WEEE by contacting ESR / RECYLUM in order to benefit
from the solutions at no additional cost of collecting and recycling used equipment. More information on www.recylum.fr.
STid reserves the right to make change without notice, for the purpose of product improvement.
Module OEM
MS2 13,56 MHz
MS2S 13,56 MHz & Blue
Notice d'installation
9600, 19200, 38400, 57600, 115200 bauds
MS2/MS2S R & S: 9600; MS2/MS2S W: 38400 (SSCP)
0.198
1.73
© STid - 20 PA des Pradeaux FR13850 Gréasque – NI1140A02- Page 2 sur 6 - Ed. 02/12/2019
RS232-TTL communication
Asynchronous
8
LSB first
1
Dimensions (in inch)
2.36
FCC integration requirement
Declaration of compliance
"DEEE Pro" Member
Módulo OEM
MS2 13.56 MHz
MS2S 13.56 MHz & Blue
Procedimiento de instalación
conforme con NOM-024 -SCFI-2013
More details about reader
communication are available
in the protocol specification.
0.39
US
FR
ES
0.1
Publicidad
