Safety Information - Allen + Roth 14307 Manual Del Usuario

SAFETY INFORMATION

!
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• Follow the installation instructions carefully. Proper installation is the installer's responsibility.
• Failure to follow correct installation procedures can result in the faucet being loose, which can
result in serious injury.
CAUTION
• Check local building codes before you begin installation to ensure compliance.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 35 minutes (including removal of old faucet)
Tools Required for Assembly (not included): Adjustable Wrench, Silicone Sealant
Helpful Tools (not included): Safety Goggles
ASSEMBLY INSTRUCTIONS
1. Shut off the water supply (1). Remove
the old faucet (2). Clean the mounting
surface (3).
2 2
1
2
1
3
2
3