Allen + Roth 14307 Manual Del Usuario página 6

OPERATION INSTRUCTIONS
1. Flushing and checking for leaks:
Important: After installation is complete,
remove the aerator (10) from the faucet with
the included aerator tool (F) Fig 1 to flush the
water lines. Turn on the water supply (2) and
allow both hot and cold water to run for at
least one minute each (3). This flushes away
any debris that could cause damage to
internal parts. While the water is running,
check for leaks. Turn off the water and
replace the aerator.
1
7
2
6
3
2 2
10
F
2
Fig 1