Cleaning Mode - Blaupunkt BLUEBOT XVAC Manual De Instrucciones

INSTALLATION INSTRUCTIONS
CHARGING
Automatic mode: The robot will return to the charging station automatically after work.
Manual mode: In the suspended state, a short press on the HOME key on the robot or via the App or remote control to start charging.
The indicator light is blinking when the robot is being charged
If the robot fails to locate the charging station, it will return to the original position automatically. Please put the
robot back on the charging station manually. Push the robot gently towards the charging station until the charging
plates of the robot connect with the charging plates of the charging station

CLEANING MODE

After starting, the robot will follow a zig-zag cleaning program
to cover the whole floor and finish the cleaning of each room
in an orderly and efficient manner. The robot will return to the
charging station and charge automatically after cleaning has
finished.
COMPLETED AREA
FIXED-POINT CLEANING
Press and hold the Home button for 3 seconds, the robot will locate itself, clean a circular area with a diameter of 1. 5m, and will then
return to the starting location and stop working automatically after the cleaning is finished.
AREA TO BE CLEANED
23
FIXED-TIME CLEANING
Fixed-time cleaning time can be set using the mobile APP.
The robot will start cleaning automatically at the appointed
time and return to the charging station after work
EN