Xavax 00111310 Manual Del Usuario página 6

g Operating instructions
Adhesive Fixing Plates for Dryers
Safety notes for putting together a washing/drying column:
– Always place the dryer on the washing machine – never the other way around
(see Fig. 1).
– The washing machine itself must be stable and level (see Fig. 1).
– Cover plate must be fixed to the washing machine.
– The dryer must not extend past any side of the washing machine (see Fig. 2).
– The fixing plates do not prevent the dryer from tipping. If unsure, secure with a
lashing strap vertically around the washing machine and dryer (see Fig. 3).
Hama GmbH & Co assumes no liability for poor, improper or negligent installation.
Installation:
1. Position washing machine and ensure that it is level.
2. Clean the worktop of the washing machine with an alcoholic solution such as ethyl
alcohol.
3. Unscrew dryer feet to an equal length of approx. 1.5 cm.
4. Place the dryer on the washing machine and position exactly.
5. Remove the protective film from the fixing plate – do not touch the adhesive.
6. Raise one foot of the dryer slightly and place the fixing plate below it before lowering
the foot and the fixing plate together. Repeat for all feet.
7. The open sides of the fixing plates must always point inward to work against any
shifting (see Fig. 4).
8. Secure with a lashing strap to prevent the dryer from tipping (see Fig. 3).
9. Stacking kit 110815 or 111093 can also be used for an improved appearance
(see Fig. 3).
7