Disassembling Your Breville Juice Fountain - Breville Juice Fountain Plus JE95XL Instrucciones De Uso

OPERATING YOUR BREVILLE JUICE FOUNTAIN cont'd
STEP 4.
With the motor running, place food into the
feed chute. Using the food pusher, gently
guide food down the feed chute. To extract
the maximum amount of juice, always push
the food pusher down slowly.
4
TO EXTRACT
MAXIMUM
JUICE PUSH
DOWN
SLOWLY
STEP 5.
Juice will flow into the juice jug and
the separated pulp will accumulate in the
pulp container.
NEVER USE FINGERS TO PUSH FOOD DOWN THE FEED CHUTE OR TO
CLEAR THE FEED CHUTE. ALWAYS USE THE FOOD PUSHER PROVIDED.
12
The Pulp Container can be
emptied during juicing by
turning the Juice Fountain
OFF and then carefully
removing the pulp container.
(Replace empty pulp
container before continuing
to juice).
Do not allow the Pulp
Container to overfill as this
may prevent correct
operation or damage the unit.
HINT:
TO MINIMIZE
WASHING UP
PLACE A
PLASTIC
FREEZER BAG
INTO THE
PULP
CONTAINER
TO COLLECT
THE PULP.

DISASSEMBLING YOUR BREVILLE JUICE FOUNTAIN

STEP 1.
Turn the Juice Fountain OFF and unplug.
STEP 2.
Remove the pulp container by holding the
handle and pivoting the bottom of the pulp
container away from the juicer.
STEP 3.
Place both hands on either side of the
locking arm and pull back and lift over the
grooves on either side of the juice cover.
STEP 4.
Move the locking arm down.
STEP 5.
Lift the juice cover off the juicer.
2
3
4
5
13