Stopping The Machine; Boiler Cleaning - Lavor Vulcano Serie Manual De Instrucciones

STOPPING THE MACHINE

Turn the burner thermostat to '0' and wait for the water to cool completely.
This prevents scale deposits and overheating of the coil and boiler, which are always damaging.
During this procedure, shut off the detergent regulator completely.
ELECTRICAL CORD
Take care not to damage the electrical cord. If it is
damaged, replace it with a special approved type
H07RNF cord, following the electrical system diagram.
The replacement must only be made by professionally
qualified staff.
CLEANING THE FUEL FILTER
Check the fuel filter (ref. 6, pos. 1) periodically and
replace if it has deteriorated or is excessively dirty.

BOILER CLEANING

The boiler cleaning must be periodically executed every
180 ÷ 200 hours of working proceeding as follows:
Carefully remove the nozzle holder flange and the
electrodes holder (boiler head, ref. 7).
18
ATTENTION:
and of the machine, it is necessary to address to
qualified personnel or to an authorized assistance
center.
1
For all maintenance of the boiler
Ref.6
Ref.7