Targus DEFCON N-KL Manual Del Usuario página 4

Targus DEFCON N-KL Mini Keyed Cable Lock
®
DEFCON Security BasePlate - PA400P
(Sold Separately)
1 Choose a solid location to attach the DEFCON Security Base Plate: a
piece of furniture, or metal cabinet. If you plan to use the two screws,
you can use the base plate as a template to pre-drill the holes.
2 Use the abrasive pad, then the alcohol wipe to prepare the area when
you will attach the DEFCON Security Base Plate.
3 After the alcohol dries, remove the backing on the base plate to expose
the adhesive and place it on the prepared location. If desired, secure the
base with the two screws.
6
Targus DEFCON N-KL Mini Keyed Cable Lock
®
NOTE: WHEN USING THE ADHESIVE BACKING, APPLY AT ROOM TEMPERATURE -60°F
(16°C), AND ALLOW IT TO BOND FOR MORE THAN 24 HOURS. NOT RECOMMEND TO
USE IN OUTDOOR OR HIGH HUMIDITY ENVIRONMENT. BONDING TO GLASS, CERAMIC
TILE, WATER-ABSORBENT MATERIALS, COPPER, BRASS, OR PLASTICIZED VINYL
WITHOUT PRIMER SURFACE ARE NOT RECOMMENDED. TARGUS RECOMMENDS USING
BOTH ADHESIVE AND SCREW TO PROVIDE MAXIMUM SECURITY. USING ONLY THE
ADHESIVE PROVIDES MARGINAL SECURITY.
4 Place the DEFCON Security Base Plate cover as shown and slide it to
the left or right to secure it in place.
5 Insert your DEFCON cable lock.
7