Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
AC Power Connection
Below are AC power connections to the FTB. 1 connector.
AC 24V Input
Ground
Green Line
V
Installation Suggestions
If you plan to install this camera enclosure into a tropical, sea coastal, or an environment
where salt water or corrosive industrial waste water/moist are present, please seal each
stainless steel screws and fittings with a silicon grease compounds. This will help prevent
electrolysis to occur and extend the life span of the camera and housing.
IMPORTANT!
1. Disconnect devices: A readily accessible disconnect device in the building installation
wiring should be incorporated.
2. Electrical Connection: Only a qualified electrician is allowed to make electrical
connections.
Features
Heater:
On at 18
Model Name
Off at 28
12VDC/24VAC
080/F
080/HF
324/HF
1. 080: [90~240VAC input (+/-10%), 4x12VDC output, 3.5A]
2. 324 (24VAC input, 4x12VDC output, 3.5A)
AC 24V Input
Blower
C
On at 35
O
C
Off at 25
O
12VDC
-
•
•
PSU
C
(Power Supply Unit)
O
C
O
080
324
•
•
•
•
•
-
5
-
-
•
Publicidad
Tabla de contenido
