Installation Instructions - Mitel IP PKM IM Guia De Instalacion

Installation Instructions

To attach an IP PKM 12 to a 5220/5224/5235/5324/5330/
5340 IP Phone or 8528/8568 Digital Phone
A
(see Figure on previous page)

Ensure that the system has been programmed to recognize the IP PKM
12, that the phone is connected to the system, and that a Mitel qualified
technician has installed an IP PKM IM in your 5220/5224/5235/5324/5330/
5340 IP Phone or 8528/8568 Digital Phone.

5220/8528/8568 Only: Ensure that the appropriate DC adapter is plugged
into the power jack under the phone.

Remove the top and bottom screws on the back, left side of the phone.

Slide the IP PKM 12 onto the left side of the phone. Ensure that the top and
bottom holes on the IP PKM 12 align with those on the back, left side of the
phone.

Connect the IP PKM 12 to the phone using screws provided in the small
envelope.

Plug the RJ45 cable into the IP PKM 12 and the IP PKM IM. The LEDs will
temporarily flash and then go out. Continually flashing LEDs indicate
incorrect installation or programming.

Program the keys as described in your 5220/5224/5235/5324/5330/5340
IP Phone or 8528/8568 Digital Phone User Guide, available at
www.mitel.com. Your System Administrator may have to program some
features.
NOTE: The IP PKM 12 will not function until it is identified in Customer Data
Entry programming by your System Administrator.
4