Precautions - Sony SDM-G76X Manual De Instrucciones

Precautions

Warning on power connections
• Use the supplied power cord. If you use a different power cord,
be sure that it is compatible with your local power supply.
For the customers in the U.S.A.
If you do not use the appropriate cord, this monitor will not
conform to mandatory FCC standards.
For the customers in the UK
If you use the monitor in the UK, be sure to use the appropriate
UK power cord.
Example of plug types
for 100 to 120 V AC for 200 to 240 V AC
The equipment should be installed near an easily accessible outlet.
Installation
Do not install or leave the monitor:
• In places subject to extreme temperatures, for example near a
radiator, heating vent, or in direct sunlight. Subjecting the
monitor to extreme temperatures, such as in an automobile
parked in direct sunlight or near a heating vent, could cause
deformations of the casing or malfunctions.
• In places subject to mechanical vibration or shock.
• Near any equipment that generates a strong magnetic field,
such as a TV or various other household appliances.
• In places subject to inordinate amounts of dust, dirt, or sand, for
example near an open window or an outdoor exit. If setting up
temporarily in an outdoor environment, be sure to take
adequate precautions against airborne dust and dirt. Otherwise
irreparable malfunctions could occur.
Be careful not to touch the air vents on the upper rear of
thedisplay, since they become heated.
Place this unit on a flat surface. Do not place it on an uneven
surface like the edge of a desk. If a part of this unit sticks out from
such surface, it may fall or cause damaged and injury.
Ventilation
The openings of the top and bottom parts are provided for
necessary ventilation. To ensure reliable operation of the set, and
to protect it from overheating, these openings must never be
blocked or covered.
The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.
Handling the LCD screen
• Do not leave the LCD screen facing the sun as it can damage
the LCD screen. Take care when you place the monitor by a
window.
• Do not push on or scratch the LCD screen. Do not place a heavy
object on the LCD screen. This may cause the screen to lose
uniformity or cause LCD panel malfunctions.
• If the monitor is used in a cold place, a residual image may
• If a still picture is displayed for a long time, a residual image
• The LCD panel becomes warm during operation. This is not a
About the built-in stereo speakers
• Do not remove the screws from the back of the speaker. Doing
• Be sure to keep magnetic recording equipment, tapes, and
for 240 V AC only
Note on the LCD (Liquid Crystal Display)
Please note that the LCD screen is made with high-
precision technology. However, black points or bright
points of light (red, blue, or green) may appear
constantly on the LCD screen, and irregular colored
stripes or brightness may appear on the LCD screen.
This is not malfunction.
(Effective dots: more than 99.99%)
Maintenance
• Be sure to unplug the power cord from the power outlet before
• Clean the LCD screen with a soft cloth. If you use a glass
• Clean the cabinet, panel, and controls with a soft cloth lightly
• Do not rub, touch, or tap the surface of the screen with sharp or
• Note that material deterioration or LCD screen coating
• Note that if service personnel changes some parts during repair,
Transportation
• Disconnect all cables from the monitor and grasp the monitor
• When you transport this monitor for repair or shipment, use the
Installation on a wall or a mounting arm
If you intend to install the display on a wall or a mounting arm, be
sure to consult qualified personnel.
4
(GB)
appear on the screen. This is not a malfunction. The screen
returns to normal as the temperature rises to a normal operating
level.
may appear for a while. The residual image will eventually
disappear.
malfunction.
so may lead to a malfunction.
floppy discs away from the speaker's opening as the speakers
generate a magnetic field. This magnetic field may affect data
stored on magnetic tapes and discs.
cleaning your monitor.
cleaning liquid, do not use any type of cleaner containing an
anti-static solution or similar additive as this may scratch the
LCD screen's coating.
moistened with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent, such as alcohol or
benzine.
abrasive items such as a ballpoint pen or screwdriver. This type
of contact may result in a scratched picture tube.
degradation may occur if the monitor is exposed to volatile
solvents such as insecticide, or if prolonged contact is
maintained with rubber or vinyl materials.
these parts may be retained.
firmly with both hands when transporting. If you drop the
monitor, you may be injured or the monitor may be damaged.
original carton and packing materials.