Barloworld Scientific Stuart RE3022C Instrucciones De Funcionamiento página 5

Maintenance
Periodically clean the pump with a damp cloth
and a mild detergent solution
This vacuum pump is 100% oil-free. All bearings
are sealed for life and permanently lubricated.
Lubrication should not be attempted.
It is recommended that any servicing or repair is
only undertaken by suitably qualified personnel.
Only spare parts supplied by Stuart or its agent
should be used. Fitting of non-approved parts
may affect the performance of the safety
features of the instrument.
If in doubt, contact the Service Department of
Stuart.
Tel: +44 1785 812121
Fax +44 1785 813748
The following spare parts are available from your
laboratory supplier. For a comprehensive parts list
please contact the Service Department of Stuart
quoting model and serial number.
Description
Catch pot
Catch pot seal
Cat. No.
RE3022C/1
RE3022C/2
Warranty
Stuart warrants this instrument to be free from
defects in material and workmanship, when used
under normal laboratory conditions, for a period
of three (3) years. In the event of a justified claim
Stuart will replace any defective component free
of charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage by
installation adaptation, modification, fitting of
non-approved parts or repair by unauthorised
personnel.
Stuart
Beacon Road
Stone
Staffordshire ST15 0SA
United Kingdom
Tel: +44 (0) 1785 812121
Fax:: +44 (0) 1785 813748
E-mail: equipment@barloworld-scientific.com
www.barloworld-scientific.com
3